The engineering work under water line shall wholly be finished, especially those equipments, valves and others that are to be installed at the openings under ship waterline, the installations should be approved by inspection.

1.Check and prpare the airbags;
2.Hang airbags(without air) to the ship at high tight;
3.Prepare the winch, connect the ship with steel wire;
4.Charge air to the airbags at low tight, upgrade the ship;
5.Landing the ship.

The following procedure is generic for the assembly and installation of Cylindrical Fender systems. The actual fender design may vary from case to case. Teamwork Maritime is available to assist with defining the best sequence.